When you first start looking into the cost of fencing, you probably focus on the big picture; things like the cost of materials, labor and whether you plan to pound posts or use concrete.
There’s a lot more that goes into chain link fence, and one thing you may need to know is how much a 50-foot roll of chain link fence weighs. So, let’s take a closer look.
Why Do You Need to Know How Much a 50-foot Roll of Chain Link Fence Weighs?
Figure out whether you can move/stand the rolls up on your own, or if you’ll need to enlist extra help. Handling heavier rolls can be challenging, especially in hot, dry climates like Phoenix, Arizona, so it’s good to be prepared.
Another consideration is the cost of transporting your chain link mesh. If you only have one or two rolls to move, you might pop them in your truck and go. For larger projects, hiring a freight company could be more sensible, and weight matters when it comes to shipping costs. If you’re building a fence on a platform or structure with a weight limit, knowing the total weight of the fence is also critical.
What Affects the Weight of a 50-foot Roll of Chain Link Fence?
Unfortunately, there isn’t a single, one-dimensional answer to how much a 50-foot roll of chain link fence weighs. The total weight depends on:
• Fence height
• Gauge of the mesh
• Mesh aperture size
Heavier-gauge wire means more steel per square foot and therefore a heavier roll. Choosing a smaller aperture size also increases how much wire is used.
Calculating the Weight of 2” Aperture Chain Link Mesh
In the chain link fence world, 2″ mesh is the most common. If you’re using a different aperture size, you’ll need to ask your supplier or manufacturer for the weight specifics.
Each wire gauge has a different weight per square foot of 2″ mesh. Common figures for galvanized chain link mesh are approximately:
• 0.483 lbs per square foot for 11 gauge mesh
• 0.717 lbs per square foot for 9 gauge mesh
• 1.277 lbs per square foot for 6 gauge mesh
Once you know the weight per square foot for your mesh, the formula to calculate the approximate weight for a given roll is simple:
Roll Height x Roll Length x Weight Per Square Foot = Weight per Roll
This helps you determine if you can handle the roll sizes on your own or if you need to plan for assistance or mechanical support. Heavier gauges and taller rolls tend to be more challenging to move around, which might be an important factor if you’re installing fence during an Arizona summer.
Chain Link Mesh Weight Table
Below is a table of weights for 2″ aperture mesh for 50’ rolls of chain link fence. Keep in mind that certain heavier gauges may be sold in 25’ rolls to make them easier to handle. Always confirm with your supplier so you don’t miscalculate the amount of fence fabric you need.
| Fence Height | 11 Gauge Mesh | 9 Gauge Mesh | 6 Gauge Mesh |
| 3 foot | 72.5 | 111.5 | 191.5 |
| 4 foot | 96.5 | 149 | 256 |
| 5 foot | 120.5 | 185.5 | 319 |
| 6 foot | 147.5 | 223 | 382.5 |
| 7 foot | 172 | 260 | 446.5 |
| 8 foot | 196.5 | 297.5 | 510 |
| 10 foot | 246 | 372 | 637.5 |
All weights are in pounds and based on 50-foot rolls of chain link mesh in the heights listed. If you have a large commercial project, especially in or around Phoenix, keep in mind how many rolls you’ll need to move and store before installation begins.
Ask Your Supplier
If you’re using a chain link product that’s not 2″ aperture or you have specific concerns about weight, always confirm with your supplier or manufacturer. They can provide exact details for the material you’re purchasing. That way, you’ll have the right information before your fence arrives on site.
Western Fence Co. is a locally trusted fence contractor serving the Phoenix Metro area. We specialize in chain link fence installation for commercial properties, offering sturdy, durable materials well-suited to Arizona’s climate. If you’re looking for chain link fence installation or a cost estimate, learn more about our Phoenix chain link fence installation services.